Domestic Electropumps

  • B-JET Press

    DESCRIPTION:
    Automatic pressure booster set for domestic use with  24 lt pressure tank and EPDM diaphragm, cabled pressure switch and pressure gauge.

    SUGGESTED APPLICATIONS:
    Domestic use, particularly suitable for water pressurization into the mains, and small automatic irrigations.

    CONSTRUCTION FEATURES:
    Pump body: Cast Iron
    Motor bracket: Cast Iron
    Impeller: Noryl ( on request: brass)
    Diffuser: Noryl
    Mechanical seals: Ceramics  steatite / carbon graphite
    Insulation class: F
    Protection class: IPX4

    Read moreShow details

  • SPM

    TYPE:
    Submersible electric pump.
    This extremely reliable and versatile pump is suitable for a wide range of applications with chemically neutral wastewater.

    MAXIMUM IMMERSION DEPTH:
    5 metres / 16 ft.

    SUGGESTED APPLICATIONS:
    Clear water transfer from water basins or water tanks, rain water collection and wastewater pumping.

    MAX OPERATING TEMPERATURE:
    35 °C / 95 °F (water).

    CONSTRUCTION FEATURES:
    Pump body: PP30VF
    Motor bracket: S Steel AISI 304
    Impeller: Noryl (SPM 5000) S. steel AISI 304 (SPM 7000-9000)
    Mechanical seals: Alumina/ carbon graphite (SPM 5000) Silicon carbide (SPM 7000-9000)
    Insulation class: F
    Protection class: IP68

     

    Read moreShow details

  • RIVA Tec

    DESCRIPTION:
    This pressurization electric system  is suitable for domestic application and small irrigation systems. It’s composed by RIVA 80-100  pump and “Optimatic” control system, that grants its high efficiency and keeps the pressure constant. This device is composed by a small diaphragm tank to avoid possible losses into the system. The “Dry-stop” device protect the pump from dry operation.

    CONSTRUCTION FEATURES:
    Pump body: Polypropylene
    Motor bracket: Aluminium
    Impeller: Noryl
    Diffuser: PBT
    Mechanical seals: Alumina / carbon graphite
    Insulation class: F
    Protection class: IPX4

    Read moreShow details

  • DW-JET

    TYPE:
    Self-priming electropump.

    MAXIMUM SUCTION DEPTH:
    This system is designed to lift water from wells with a minimum diameter of 4” (approx. 11cm).
    The (ideal) maximum suction depth for this pump is approx 15-20 metres / 49-65 ft using P20 ejectors and approx 20-30 metres / 66-98 ft using P30 ejectors (these values may vary according to altitude and temperature).

    SUGGESTED APPLICATIONS:
    Small irrigations (gardens, vegetable gardens).
    This pump is usually equipped with a pressure tank, to use it in the automatic way.

    MAX OPERATING TEMPERATURES:
    35 °C / 95 °F (water), 40 °C / 104 °F (environment).

    CONSTRUCTION FEATURES:
    Pump body: Cast Iron
    Motor bracket: Cast Iron
    Impeller: Noryl
    Diffuser: Noryl
    Mechanical seals: ceramic steatite / carbon graphite
    Insulation class: F
    Protection class: IPX4

    Read moreShow details

  • JET Press

    DESCRIPTION:
    Automatic pressure booster sets for domestic use with  24 lt pressure tank and EPDM diaphragm, cabled pressure switch and pressure gauge.

    SUGGESTED APPLICATIONS:
    Domestic use, particularly suitable for water pressurization into the mains, and small automatic irrigations.

    CONSTRUCTION FEATURES:
    Pump body: Cast Iron
    Motor bracket: Aluminium
    Impeller: Noryl ( on request: brass)
    Diffuser: PBT
    Mechanical seals: alumina / carbon graphite
    Insulation class: F
    Protection class: IPX4

    Read moreShow details

  • SPA

    TYPE:
    Submersible electric pump.
    This extremely reliable and versatile pump is suitable for a wide range of applications with chemically neutral clear water.

    MAXIMUM IMMERSION DEPTH:
    5 metres / 16 ft.

    SUGGESTED APPLICATIONS:
    Clear water distribution from water basins or water tanks, rain water collection and drainages (clear water).

    MAX OPERATING TEMPERATURE:
    35 °C / 95 °F (water).

    CONSTRUCTION FEATURES:
    Pump body: PP30VF
    Motor bracket: S Steel AISI 304
    Impeller: Noryl (SPA 5000) S. steel AISI 304 (SPA 7000-9000)
    Mechanical seals: Alumina/ carbon graphite (SPA 5000) Silicon carbide (SPA 7000-9000)
    Insulation class: F
    Protection class: IP68

    Read moreShow details

  • JET Matic

    DESCRIPTION:
    Automatic pressure booster sets for domestic use with  24 lt pressure tank and EPDM diaphragm, Switchmatic and pressure gauge.

    SUGGESTED APPLICATIONS:
    Domestic use, particularly suitable for water pressurization into the mains, and small automatic irrigations.

    CONSTRUCTION FEATURES:
    Pump body: Cast Iron
    Motor bracket: Aluminium
    Impeller: Noryl ( on request: brass)
    Diffuser: PBT
    Mechanical seals: alumina / carbon graphite
    Insulation class: F
    Protection class: IPX4

    Read moreShow details

  • B-JET

    TYPE:
    Self-priming electropump.
    This term means the capability to lift clear water even if mixed with air.

     MAXIMUM SUCTION DEPTH:
    The maximum suction depth for this pump is approx 9 metres / 29 ft (this value may vary according to altitude and temperature).

    SUGGESTED APPLICATIONS:
    Domestic use, small irrigations (i.e. gardening) and water distribution.
    This pump is usually equipped with a pressure tank or an electronic flow switch (see electronic booster sets AQUA-TEC) to use it in the automatic way.

    MAX OPERATING TEMPERATURES:
    35 °C / 95 °F (water), 40 °C / 104 °F (environment).

    CONSTRUCTION FEATURES:
    Pump body: Cast Iron
    Motor bracket: Cast Iron
    Impeller: Noryl (on request: brass)
    Diffuser: Noryl
    Mechanical seals: ceramic steatite / carbon graphite
    Insulation class: F
    Protection class: IPX4

    Read moreShow details

  • IDRA Press

    DESCRIPTION:
    Automatic pressure booster sets for domestic use with  24 lt pressure tank and EPDM diaphragm, cabled pressure switch and pressure gauge.

    SUGGESTED APPLICATIONS:
    Domestic use, particularly suitable for water pressurization into the mains, and small automatic irrigations.

    CONSTRUCTION FEATURES:
    Pump body: S. steel AISI 304
    Motor bracket: Aluminium
    Impeller: Noryl ( on request: brass)
    Diffuser: PBT
    Mechanical seals: alumina / carbon graphite
    Insulation class: F
    Protection class: IPX4

    Read moreShow details

  • MCV

    TYPE:
    Multistage centrifugal pump.
    This pump grants high water flow and high head level against low power consumption. It is particularly suitable for domestic and industrial pressure boosting and fire-fighting systems.

    MAXIMUM SUCTION DEPTH:
    The maximum suction depth for this pump is approx 7 metres / 23 ft (this value may vary according to altitude and temperature).

    SUGGESTED APPLICATIONS:
    Excellent for pressure boosting and garden irrigation.

    MAX OPERATING TEMPERATURES:
    35 °C / 95 °F (water), 40 °C / 104 °F (environment).

    CONSTRUCTION FEATURES:
    Pump body: Brass
    Motor bracket: Aluminiun
    Impeller: S. steel AISI 304
    Mechanical seals: ceramic steatite / carbon graphite
    Insulation class: F
    Protection class: IPX4

     

    Read moreShow details

  • MCV-G

    TYPE:
    Automatic pressure booster set with inverter, composed by MCV 400 pumps.

    DESCRIPTION: 
    Automatic pressure booster sets equipped with two vertical multistage pumps and new generation inverters. This system allows to automatically set the use of one or both of the pumps according to the request of the user. High efficiency and energy saving are the characteristics  guaranteed by this system. Systems can be personalized.

    CONSTRUCTION FEATURES:
    Pump: Multistage 4 impellers
    Impellers: S. steel AISI 304
    Motor shaft: S. steel AISI 303
    Pump elements: Brass 58

     

     

    Read moreShow details

  • JET

    TYPE:
    Self-priming electropump.
    This term means the capability to lift clear water even if mixed with air.

     MAXIMUM SUCTION DEPTH:
    The maximum suction depth for this pump is approx 9 metres / 29 ft (this value may vary according to altitude and temperature).

    SUGGESTED APPLICATIONS:
    Domestic use, small irrigations (i.e. gardening) and water distribution.
    This pump is usually equipped with a pressure tank or an electronic flow switch (see electronic booster sets JET-TEC) to use it in the automatic way.

    MAX OPERATING TEMPERATURES:
    35 °C / 95 °F (water), 40 °C / 104 °F (environment).

    CONSTRUCTION FEATURES:
    Pump body: Cast Iron
    Motor bracket: Aluminium
    Impeller: Noryl (on request: brass)
    Diffuser: PBT
    Mechanical seals: alumina / carbon graphite
    Insulation class: F
    Protection class: IPX4

    Read moreShow details

  • EXTREMA

    TYPE:
    Submersible electric pump.
    These pumps are designed to pump clear water in specific applications.

    MAXIMUM IMMERSION DEPTH:
    5 metres / 16 ft.

    SUGGESTED APPLICATIONS:
    Swimming pools and flooded buildings down to approx 2mm of remaining water level. The “A” version is equipped with magnetic switch.

    MAX OPERATING TEMPERATURE:
    35 °C / 95 °F (water).

    CONSTRUCTION FEATURES:
    Pump body: PP30VF
    Motor bracket: S Steel AISI 304
    Impeller: Noryl
    Mechanical seals: Alumina/ graphite
    Insulation class: F
    Protection class: IP68

    Read moreShow details

  • MC 250 X

    TYPE:
    Multistage centrifugal pump.
    This multistage pump grants high water flow and high head level against low power consumption. It’s reliable, silent and practical.

    MAXIMUM SUCTION DEPTH:
    The maximum suction depth for this pump is approx 7 metres / 23 ft (this value may vary according to altitude and temperature).

    SUGGESTED APPLICATIONS:
    Excellent for pressure boosting and garden irrigation. It’s common to use this pump for automatic booster systems (MCX-G).

    MAX OPERATING TEMPERATURES:
    35 °C / 95 °F (water), 40 °C / 104 °F (environment).

    CONSTRUCTION FEATURES:
    Pump body: S Steel AISI 304
    Motor bracket: aAluminium
    Impeller: S Steel AISI 304
    Mechanical seals: ceramic steatite/ metalized carbon
    Insulation class: F
    Protection class: IPX4

     

    Read moreShow details

  • MCX-G

    TYPE:
    Automatic pressure booster set with inverter, composed by MC 250 X pumps.

    DESCRIPTION: 
    Automatic pressure booster sets equipped with two stainless steel multistage pumps and a new generation electronic pressure switch (MCN-G) or with inverter (MCN-IV) if requested. This system allows to automatically set the use of one or both of the pumps according to the request of the user. High efficiency and energy saving are the characteristics  guaranteed by this system. Systems can be personalized.

    CONSTRUCTION FEATURES:
    Pump body: S. steel AISI 304
    Motor bracket: Aluminium
    Impeller: S. steel AISI 304
    Mechanical seals: Ceramics + steatite / metallic coal
    Insulation class: F
    Protection class: IPX4

    Read moreShow details

  • IDRA

    TYPE:
    Self-priming electropump.
    This term means the capability to lift clear water even if mixed with air.

     MAXIMUM SUCTION DEPTH:
    The maximum suction depth for this pump is approx 9 metres / 29 ft (this value may vary according to altitude and temperature).

    SUGGESTED APPLICATIONS:
    Domestic use, small irrigations (i.e. gardening) and water distribution.
    This pump is usually equipped with a pressure tank or an electronic flow switch (see electronic booster sets IDRA -TEC) to use it in the automatic way.

    MAX OPERATING TEMPERATURES:
    35 °C / 95 °F (water), 40 °C / 104 °F (environment).

    CONSTRUCTION FEATURES:
    Pump body: S. steel AISI 304
    Motor bracket: Aluminium
    Impeller: Noryl (on request: brass)
    Diffuser: PBT
    Mechanical seals: alumina / carbon graphite
    Insulation class: F
    Protection class: IPX4

    Read moreShow details

  • RIO

    TYPE:
    Multistage submersible electric pump.
    These pumps are particularly suitable to lift water from medium depth wells obtaining a high pressure and flow level.

     MAXIMUM IMMERSION DEPTH:
    15 metres / 49 ft

    SUGGESTED APPLICATIONS:
    Water pumping from wells, water storages and tanks, rain water recycling. Excellent for automatic garden watering systems.

    MAX OPERATING TEMPERATURE:
    35 °C / 95 °F (water).

    CONSTRUCTION FEATURES:
    Pump body: S. steel AISI 304
    Motor bracket: S Steel AISI 304
    Impeller: S Steel AISI 304
    Mechanical seals: Alumina/ graphite
    Insulation class: F
    Protection class: IP68

    Read moreShow details

  • MCX 80-100-200

    TYPE:
    Multistage centrifugal pump.
    This pump grants high water flow and high head level against low power consumption. Reliable, silent and practical.

    MAXIMUM SUCTION DEPTH:
    The maximum suction depth for this pump is approx 7 metres / 23 ft (this value may vary according to altitude and temperature).

    SUGGESTED APPLICATIONS:
    Excellent for pressure boosting and garden irrigation. This pump is usually equipped with a pressure tank or an electronic flow switch (see electronic booster sets MULTI-TEC) to use it in the automatic way.

    MAX OPERATING TEMPERATURES:
    35 °C / 95 °F (water), 40 °C / 104 °F (environment).

    CONSTRUCTION FEATURES:
    Pump body:S Steel AISI 304
    Motor bracket: Aluminium
    Impeller: S Steel AISI 304
    Mechanical seals: ceramic steatite / carbon graphite
    Insulation class: F
    Protection class: IPX4

    Read moreShow details

  • MCN-G

    TYPE:
    Automatic pressure booster set with inverter, composed by MC 130 N pumps.

    DESCRIPTION: 
    Automatic pressure booster sets equipped with two stainless steel multistage pumps and a new generation electronic pressure switch (MCN-G) or with inverter (MCN-IV) if requested. This system allows to automatically set the use of one or both of the pumps according to the request of the user. High efficiency and energy saving are the characteristics  guaranteed by this system. Systems can be personalized.

    CONSTRUCTION FEATURES:
    Pump body: S. steel AISI 304
    Motor bracket: Aluminium
    Impeller: Noryl
    Mechanical seals: Ceramics  steatite / metallic coal
    Insulation class: F
    Protection class: IPX4

    Read moreShow details

  • DWS

    TYPE:
    Self-priming electropump.

    MAXIMUM SUCTION DEPTH:
    This system is designed to lift water from wells with a minimum diameter of 4” (approx. 11cm).
    The (ideal) maximum suction depth for this pump is approx 15-20 metres / 49-65 ft using P20 ejectors and approx 20-30 metres / 66-98 ft using P30 ejectors (these values may vary according to altitude and temperature).

    SUGGESTED APPLICATIONS:
    Small irrigations (gardens, vegetable gardens).
    This pump is usually equipped with a pressure tank, to use it in the automatic way.

    MAX OPERATING TEMPERATURES:
    35 °C / 95 °F (water), 40 °C / 104 °F (environment).

    CONSTRUCTION FEATURES:
    Pump body: Cast Iron
    Motor bracket: Aluminium
    Impeller: Noryl
    Diffuser: PBT
    Mechanical seals: alumina / carbon graphite
    Insulation class: F
    Protection class: IPX4

    Read moreShow details